10年專注重型紙箱定制生產廠家

精密儀器,電子電器,瓦楞紙箱等包裝解決方案提供商

Beautiful and unique heavy carton appearance packaging is conducive to the modeling and extension of products and company image. In order to achieve satisfactory printing results, heavy cartons are inseparable from the mutual cooperation and coordination between water-based ink, paperboard, printing plate, printing press and skilled printing operations.

重型紙箱的調配包含油墨調和，以及油墨印刷適應性的調整。其中的適應性包括油墨的粘度、流動性和干燥度。在購買水性油墨時應選擇信譽好的供應商，確定水性油墨的質量和成本的高低。水性油墨分為高、中、普通三個等級。它們間的區別在于干燥速度、耐磨性、飽和度、耐水性、光澤、細度、粘度等。在進行適當?shù)馁?gòu)買之前確定需求。此外，水性油墨的管理也很重要，小編在此為您整理了相關信息：

The deployment of heavy cartons includes ink blending and adjustment of ink printing adaptability. The adaptability includes the viscosity, fluidity and dryness of ink. When purchasing water-based ink, we should choose reputable suppliers to determine the quality and cost of water-based ink. Water based inks are divided into three grades: high, medium and ordinary. The difference between them lies in drying speed, wear resistance, saturation, water resistance, gloss, fineness, viscosity, etc. Identify needs before making appropriate purchases. In addition, the management of water-based ink is also very important. Xiaobian has sorted out relevant information for you here:

1適當定時的做印刷滾筒清理，以免之前的油墨殘留使下一次的印刷出現重影模糊不清等狀況。

1. The printing drum shall be cleaned properly and regularly to prevent the previous ink residue from causing ghosting and blurring in the next printing.

2為避免粘性過低造成的顏色淺化，應將機器內的水排放干凈。

2 to avoid color lightening caused by low viscosity, drain the water in the machine.

3油墨上機量應控制在5-10KG以內。

3. The amount of ink on the machine shall be controlled within 5-10kg.

4添加新的油墨時應當再三核對清楚油墨的顏色是否一致。

4 when adding new ink, you should check again and again whether the color of the ink is consistent.

5重型紙箱印刷機在使用一段時間后，應當做好保養，比如定時定量的進行補水穩定劑來穩定印刷效果。

5 after using the heavy carton printing machine for a period of time, it should be well maintained, such as regularly and quantitatively replenishing water stabilizer to stabilize the printing effect.

6水性油墨在使用后應當加上蓋子嚴密封好，避免油墨變干、變質的發生。

6 water based ink should be sealed tightly with a cover after use to avoid drying and deterioration of the ink.

7上下印刷機時盡量不讓水流入墨桶從而稀釋油墨，降低油墨的粘性。

7 try not to let water flow into the ink barrel when going up and down the printing press, so as to dilute the ink and reduce the viscosity of the ink.

8為防止掉色在印刷完成后抹上一層防潮油，既可以防止印刷掉色掉粉，還有一些防水防潮的作用。

8 in order to prevent color fading, apply a layer of moisture-proof oil after printing, which can not only prevent color fading and powder loss, but also prevent water and moisture.

重型紙箱廠家http://jshqfj.cn/感謝您的瀏覽，如有其他疑問歡迎登錄我們官網進行查看。

Heavy carton manufacturer http://jshqfj.cn/ Thank you for your browsing. If you have any other questions, please log in to our official website.